Netgear AC1200 Router Won’t Connect to Internet? Here’s the Fix!
Don’t throw your Netgear AC1200 router in a bin even when it fails to connect to the internet. We understand what you might be feeling now. It is truly frustrating when your router won’t connect to the internet after a successful Netgear AC1200 setup.
But, don’t worry! We’ve got you covered! In this post, we have shed some light on reasons why your Netgear AC1200 router is refusing to connect with your WiFi connection. Apart from that, we will also provide you the fixes to resolve this annoying issue in minutes.
So, without further discussion, let’s get started, shall we?
Fix: Netgear AC1200 Router Won’t Connect to the Internet
The Netgear AC1200 Router is Placed Away from Your Modem
One of the common yet major reasons why your Netgear AC1200 router won’t connect to the internet is because it is placed away from the reach of your modem. Also, improper or wrong placement of your Netgear router results in the same issue. So, to get the most out of your Netgear router, place it in the same room as that of your modem.
Apart from that, check whether both the devices are properly connected via an Ethernet cable or not. If not, consider connecting them.
Your Netgear Router is Surrounded by Interference-creating Devices
If you have placed your Netgear AC1200 router near to cordless phones or baby monitors, then the speed of your internet will slow down and you will not be able to get the most out of your device. So, to enjoy the router’s uninterrupted range in every nook and cranny of your house, place it at a certain distance away from interference-creating devices.
The Firmware of Your Netgear AC1200 Router is Outdated
Well, this can be another reason behind Netgear AC1200 router won’t connect to the internet issue. So, to enjoy the features of your Netgear router to the fullest, make sure to update its firmware timely.
You need to access the www.routerlogin.net setup page to update the firmware of your AC1200 router. For more information about the Netgear router firmware update process, get in touch with our competent experts.
Note: Your PC or laptop must be connected to your router’s WiFi in order complete the firmware update process in a hassle-free way.
Your Netgear Router Isn’t Configured Properly
Are you sure that your Netgear router is configured properly? On the off chance if your answer is no, then you’ve come across with another annoying reason why your Netgear AC1200 router is not connecting to the internet. To troubleshoot the issue, visit routerlogin.net administrative page and configure your AC1200 completely and properly.
Your Netgear Router is Overheated
In the event that the troubleshooting steps listed above haven’t helped you out in resolving the issue, then there is a high possibility that your Netgear AC1200 router is overheated. To get the most out of your router’s performance, we suggest you power cycle it once.
To power cycle your Netgear AC1200 router, go through the steps outlined underneath:
- Disconnect your Netgear router from your modem and unplug it.
- Wait for at least 10 minutes.
- Plug your Netgear AC1200 router back in again.
- The power LED on your Netgear router will start flashing green and become stable shortly.
- To check the internet connection, connect your PC or laptop to the AC1200’s WiFi and visit the Netgear router login page.
In a Nutshell
We hope that the troubleshooting tips given in this post have helped you out to fix Netgear AC1200 router won’t connect to internet issue. Just in case, the same issue continues to trouble you, get in touch with our highly-qualified technicians via comments.