Not being able to access the Netgear routerlogin.net web page is one of the most common issues that users face with their WiFi routers. Have you been facing the same issue? If yes, then congratulations! Don’t know how, but you’ve somehow landed on the right page.
Here, you’ll find every tip and trick required in order to troubleshoot the routerlogin.net not working issue. So, without wasting any more time, scroll down, and read on.
Note: In case you get stuck at any point while trying to troubleshoot the Netgear routerlogin.net not working issue, don’t hesitate to reach out to our highly experienced technical experts. They’ll surely be able to pull you out of your misery.
Ways Through Which You Can Access Routerlogin.net
- Connect Your WiFi Devices
If your Netgear WiFi router isn’t properly connected to the modem, you are bound to face the routerlogin.net not working issue. Therefore, make sure that you connect both your WiFi devices properly. To be on the safer side, it is recommended that you connect your devices with a cable instead of connecting them wirelessly.
Caution: Connecting your Netgear router to the modem wirelessly isn’t reliable as compared to connecting your devices with an Ethernet cable.
2. Call Your ISP Immediately
One of the major reasons why you aren’t able to perform Netgear router login is because your internet connection is weak. Thus, see to it whether your WiFi router has access to a seamless internet connection or not.
In case it doesn’t, waste no time in getting in touch with your Internet Service Provider. If the internet issue is from their end, they’ll send one of their agents to your house to fix the internet issue.
3. Use the Correct Web Address
On a scale of 1-10, how careful were you while typing the default web address? Maybe 6 or 7? If yes, then know that’s exactly where you went wrong. Messing up with the default web address is something that you can’t afford, especially if you want any issues.
So, make sure that you keep your eyes open while typing the default web address for routerlogin. Also, update your web browser before logging into your Netgear WiFi router. Doing so will ensure that you face no issues while accessing routerlogin.net.
4. Make Use of the Default IP
Many times, users end up getting stuck with the routerlogin.net not working issue because of a backend issue. Chances are that you’re the routerlogin.net not working because of the same reason. But, worry not! This teeny-tiny issue can be fixed.
You can make use of the 192.168.1.1 default IP of your router for login. Now, for those of you who have no idea about what might be the IP of their Netgear WiFi router, we recommend you to refer to the Netgear manual.
5. Perform Firmware Update
If none of the troubleshooting tips mentioned above were able to help you fix the routerlogin not working issue, then performing firmware update might be your last resort.
Walk through the step-by-step guidelines outlined below and know how to update the firmware of your Netgear WiFi device:
- Press the Power button on your home router.
- Connect it to the modem using a cable.
- Log into your WiFi device and go to Settings.
- Click on the Firmware Update button under the Administration option.
By following these instructions, you’ll be able to update the firmware of your WiFi device.
Hopefully, the troubleshooting mentioned in this article might have helped you in getting rid of the Netgear routerlogin.net not working issue. On the off chance, if the issue persists, feel free to get in touch with highly experienced technical experts.